|
|
SW71122
Programming Software for MLX71122
Start Product Discussion
Subscribe to Product
(includes all related assets)
This program is used to configure the MLX71122 Receiver.
Programming is done by interfacing the MLX71122 chip to the parallel port as follows:
LPTx D0 (pin 2) -> MLX71122 SDEN (Serial Enable)
LPTx D1 (pin 3) -> MLX71122 SLCK (Serial Clock)
LPTx D2 (pin 4) -> MLX71122 SDTA (Serial Data)
The parallel port must be configured in the PC BIOS for 'Output Only' or 'PC AT'.
The program uses DriverLINX Port I/O driver to interface to the parallel port.
Revision History:
V2.0 / 28.08.2006 / Initial Version
V2.1 / 26.03.2007 / update for 2nd version of MLX71122A
|
|
Buy At Digi-Key
Buy At Future Electronics
Features and Benefits
- The setup program installs the executable and the Port I/O Driver to run the Programming Software on Windows 95/98/2000 and Windows XP.
Assets
|
|