Joined: 24 March 2008
Location: US
Posts: 2

Back to Top

I am getting a fail indication for the PTC-04 when I test it. The BIN code is 311 and the TEST Main ID Serial Number is indicated. Also, I need a pinout description of the application connector on the rear of the PTC-04 (15-pin dsub). Please advise.

Joined: 1 January 2005
Location:
Posts: 13

Back to Top

The HardWare ID in the EEPROM has been modified or corrupted. If this is the only error, the programmer should work OK.

You can repair it; select the "Configuration" button in the PTC-04 User Interface. The HW ID field should contain something like "03050007". This should be the same as the "Unit" number on the side of the programmer. You can modify the field and save it.

You can find the DB-15 pinout on the CD:
PTC04\Daughter_Board\Documentation\Ptc04_DB_Hall01_DataSheet.pdf

I will email this document to you as well.

Joined: 24 March 2008
Location: US
Posts: 2

Back to Top

OK, the PTC-04 is now working and passes the self-test. However, now I cannot program my devices. I am using the MLX90251LVA-0 device and the programmer does not recognize it to either program and/or read the EEPROM on it. Please advise.

Joined: 1 January 2005
Location:
Posts: 13

Back to Top

Hi Richard,
I will contact you directly to try to solve the problem.