|
|
MLX80104
LIN Switch/LIN IO-Control 2nd Generation
 Download MLX80104 Datasheet (PDF)
Subscribe To Updates
MLX80104 General Description
The MLX80104 is a fully integrated LIN slave for switch or similar IO-Control/Extension Applications in automotive. It is suitable for bus systems according to LIN 2.x as well as SAE J2602. All necessary components are integrated into one single silicon die. The MLX80104 consists of a microcontroller, voltage regulator, LIN physical Layer, LIN Protocol Driver, ADC, PWM as well as high voltage IOs. The combination of a physical layer LIN transceiver and a LIN protocol controller along with easy to configure switch inputs and PWM outputs makes it possible to develop simple, but powerful and cheap switch slave nodes for LIN Bus systems in a short timeframe.
More details you'll find unter
http://softdist.melexis.com
Doors modules, Steering wheel, etc
LIN based Switch modules for Steering Wheel, Dashboard, Seat, Roof, Door ...
Application requiring easy connection to LIN network
Simple Actuators like Seat Heating
Other LIN IO Extensions
Proven Dual Task MCU architecture
LIN Protocol Controller
16-bit Application Controller
LIN Physical Layer Transceiver
Approved LIN Driver
uniROM
With the so called "uniROM" Melexis offers a ready to use application Software which removes the need for new software development for new LIN applications. This Software can be configured to the need of different applications
MLX80104 Features and Benefits
- Application Controller
- Internal 12 MHz RC-Oscillator
- 16-bit MULAN MCU with 16kB ROM, 512 Byte RAM, 192 Byte EEPROM with ECC
- LIN Protocol Controller according to LIN 2.x and SAE J2602
- Baud rate up to 19.2 kBaud
- Frame processing
- Low interrupt load to the application
- LIN Transceiver according to LIN 2.x and SAE J2602
- Slew rate control for best EME behaviour
- High EMI immunity
- IO Configuration
- 18 fully configurable high current/high voltage inputs/outputs (7mA/26.5V)
- Ground shift tolerant I/Os
- All IOs configurable pull up or pull down characteristics
- Eight PWM outputs (8-bit, 80Hz to 30kHz)
- Ten 10-bit ADC channels
- Eight Interrupt capable Inputs
- Configurable Wake up sources (LIN, IOs, ADC)
- Constant current output (2mA) for external low voltage loads via bipolar transistor
- IOs fully diagnosable
- Integrated window watchdog and additional independent analogue watchdog
- Voltage Regulator
- Low standby current consumption of typ 25µA in sleep mode
- Over-temperature shutdown, 45V load dump protected
- Other Features
- Automotive Temperature Range of –40°C to 125°C
- Small MLF 5x5 28pin package
MLX80104 Tools
| Software & Tools |
File Type |
Size |
Revision |
Date |
Action |
| Softdist server |
|
|
002 |
4/28/2013 |
|
MLX80104 Environmental Information
This text will be replaced
SEND EVENTS
EDIT PLAYLIST
|
RECEIVED UPDATES
ITEM DATA
|
MLX80104 Frequently asked Questions
Buy MLX80104
|
|