Internship: Improve loader capacity on testing handler - Ieper, Belgium

Internship Validation of Production equipment

  • Process Engineering

  • Intern

  • Ieper

Your future job

As an intern in continuous improvement department, you will improve the loader capacity by a new mechanical design for our testing handlers.

To guarantee to deliver device (Integrated Circuit) with good quality, we have to test them before sending to customer. We use automatic handler for this: Rasco-1000.

We feed the handler with tubes of chips: between 25 to 80 parts per tube.
Depending of the device (size and test time), the tube loader can get quickly empty. Then, the machine stops and waits that an operator fills the machine. We need to improve the performance of the machine by increase the loader capacity.

Goal is to have a MTBA (Mean Time Between Assistance) of 30 minutes minimum. Constraint related to total height of the system to be considered: an operator (even small size) should be capable to feed the loader easily.

Timing: 8-10 weeks

Your profile 

●Mechanical design on drawing software like Creo or Solidworks. 
●Basic knowledge for pneumatic and electricity.
●Arduino programming
● Engineering school or Bachelor
●Good level in English and able to introduce the project in English with the technical vocabulary. 

Facts and Figures

  • Working Hours per Week


  • Business Travel Required


  • Work Permit Required


  • Working in Shift Required