Two channel LIN master transceiver
MLX80002 Melexis
The MLX80002 is a two channel physical layer device for applications of low speed vehicle serial data network communication using the Local Interconnect Network (LIN) protocol.
Top features
-
LIN 2.x/SAE J2602 compliant
-
Two-channel independent enhanced master transceiver function
-
Lowest space (QFN4x4) and minimized external components
-
Quad/Dual versions with same package and foot print for cost/space optimized design
-
Slew rate selection and high speed flash mode
-
Wide operating voltage range VS = 5 to 27 V
-
Fully compatible to 3.3V and 5V devices
-
Very low standby current consumption of 10µA in sleep mode
-
WAKE input for local wake-up capability
-
Remote and local wake-up source recognition
-
Control output INH for external components
-
Integrated termination (resistor and decoupling diode) for both LIN master and slave nodes
-
TxD dominant timeout function in slave configuration
-
RxD dominant timeout function in master configuration
-
Sleep timer
-
Low EME (emission) and high EMI (immunity) level
-
High impedance LIN pin in case of loss of ground or battery
- Enhanced ESD robustness
Two channel LIN master transceiver - MLX80002
Product description
The MLX80002 is a two channel physical layer device for applications of low speed vehicle serial data network communication using the Local Interconnect Network (LIN) protocol.
The device is designed in accordance to the physical layer definition of the LIN Protocol Specification Package 2.x and the SAE J2602 standard.
Because of the very low current consumption of the MLX80002 in the recessive state it’s suitable for ECU applications with hard standby current requirements. An advanced sleep mode capability allows a shutdown of a complete master node. The included wake-up function detects incoming dominant LIN messages and enables the voltage regulator.
Features and benefits
-
LIN 2.x/SAE J2602 compliant
-
Two-channel independent enhanced master transceiver function
-
Lowest space (QFN4x4) and minimized external components
-
Quad/Dual versions with same package and foot print for cost/space optimized design
-
Slew rate selection and high speed flash mode
-
Wide operating voltage range VS = 5 to 27 V
-
Fully compatible to 3.3V and 5V devices
-
Very low standby current consumption of 10µA in sleep mode
-
WAKE input for local wake-up capability
-
Remote and local wake-up source recognition
-
Control output INH for external components
-
Integrated termination (resistor and decoupling diode) for both LIN master and slave nodes
-
TxD dominant timeout function in slave configuration
-
RxD dominant timeout function in master configuration
-
Sleep timer
-
Low EME (emission) and high EMI (immunity) level
-
High impedance LIN pin in case of loss of ground or battery
- Enhanced ESD robustness
