Small Product Family image - Communicate

The MLX80050 extends its successful LIN transceiver and system basis product line for the simple and effective development of LIN slaves.

This IC transceiver combines a physical layer LIN transceiver according to LIN 2.x as well as SAEJ2602 with a 5V voltage regulator with RESET output for the connected microcontroller.

This enhanced IC transceiver is optimized in accordance with the increased EMC requirements for single wire bus systems as well as the “hardware requirements for LIN, CAN and flexray interfaces in automotive applications” defined from German OEMs.

Our MLX80050 achieves world leading ESD robustness of >20kV with direct discharge as well as >15kV with indirect discharge according to IEC61000-4-2.

Read More

Top Features

  • LIN 2.x / SAE J2602 compliant

  • Operating voltage VSUP = 5 ... 18 V

  • 3 modes: Normal, silent and sleep

  • Linear low drop voltage regulator

  • Normal mode 5V/70mA ±2%

  • Silent mode 5V/20mA ±2%

  • Low current consumption (typ) sleep mode 20uA, silent mode “noload” 45uA

  • Output current limitation

  • LIN-Bus Transceiver

  • Baud rate up to 20 kBaud

  • Slew rate control for best EME behaviour

  • Low slew mode for optimized SAE J2602 transmission

  • High impedance LIN pin in case of loss of ground or battery

  • Bus input voltages -24V to 30V independent from VBat

  • Remote and local wake up source recognition

  • VCC undervoltage detection at NRES output (start-up delay 4ms)

  • VSUP undervoltage detection (POR), Over temperature shutdown

  • TxD dominant time out function, Standby mode time out after 350ms

  • Automotive temperature range of –40°C to 125°C

  • Interface I/O’s independent from voltage regulator output

  • Enhanced ESD robustness according to IEC 61000-4-2

  • Direct ESD discharge for pin LIN >20kV (only Lin cap connected) and for pin VBAT >15kV

  • Indirect ESD discharge for pin LIN >15kV
Discover all features
LIN system basis IC transceiver 5V/70mA - MLX80050

Features and benefits

  • LIN 2.x / SAE J2602 compliant

  • Operating voltage VSUP = 5 ... 18 V

  • 3 modes: Normal, silent and sleep

  • Linear low drop voltage regulator

  • Normal mode 5V/70mA ±2%

  • Silent mode 5V/20mA ±2%

  • Low current consumption (typ) sleep mode 20uA, silent mode “noload” 45uA

  • Output current limitation

  • LIN-Bus Transceiver

  • Baud rate up to 20 kBaud

  • Slew rate control for best EME behaviour

  • Low slew mode for optimized SAE J2602 transmission

  • High impedance LIN pin in case of loss of ground or battery

  • Bus input voltages -24V to 30V independent from VBat

  • Remote and local wake up source recognition

  • VCC undervoltage detection at NRES output (start-up delay 4ms)

  • VSUP undervoltage detection (POR), Over temperature shutdown

  • TxD dominant time out function, Standby mode time out after 350ms

  • Automotive temperature range of –40°C to 125°C

  • Interface I/O’s independent from voltage regulator output

  • Enhanced ESD robustness according to IEC 61000-4-2

  • Direct ESD discharge for pin LIN >20kV (only Lin cap connected) and for pin VBAT >15kV

  • Indirect ESD discharge for pin LIN >15kV
Used in these

Industries

  • Automotive - Body, HVAC, Comfort & Lighting

Inspired Engineering

We use cookies in order to let you fully experience this website. Cookies are small files we put in your browser to mainly track usage or remember your settings of our website. Want to know more about how we use these Cookies please read our Cookie policy.

OK