LIN switch/IO-control - OTP memory version of MLX80104
MLX80105 MelexisThe MLX80105 is a fully integrated LIN slave for switch or similar IO-control/extension applications in automotive.
Top features
-
Application controller
-
Internal 12 MHz RC-oscillator
-
16-bit MULAN MCU with 16kB OTP, 512 byte RAM, 192 byte EEPROM with ECC
-
LIN protocol controller according to LIN 2.x and SAE J2602
-
Baud rate up to 19.2 kBaud
-
Frame processing
-
Low interrupt load to the application
-
LIN transceiver according to LIN 2.x and SAE J2602
-
Slew rate control for best EME behaviour
-
High EMI immunity
-
IO configuration
-
18 fully configurable high current/high voltage inputs/outputs (7mA/26.5V)
-
Ground shift tolerant I/Os
-
All IOs configurable pull-up or pull-down characteristics
-
Eight PWM outputs (8-bit, 80Hz to 30kHz)
-
Ten 10-bit ADC channels
-
Eight interrupt capable inputs
-
Configurable wake up sources (LIN, IOs, ADC)
-
Constant current output (2mA) for external low voltage loads via bipolar transistor
-
IOs fully diagnosable
-
Integrated window watchdog and additional independent analogue watchdog
-
Voltage regulator
-
Low standby current consumption of type 25µA in sleep mode
-
Over-temperature shutdown, 45V load dump protected
-
Other features
-
Automotive temperature range of –40°C to 125°C
- Small MLF 5x5 28-pin package
Product description
The MLX80105 is a fully integrated LIN slave for switch or similar IO-control/extension applications in automotive.
It is suitable for bus systems according to LIN 2.x as well as SAE J2602. All necessary components are integrated into one single silicon die. The MLX80105 consists of a microcontroller, voltage regulator, LIN physical layer, LIN protocol driver, ADC, PWM as well as high voltage IOs.
The combination of a physical layer LIN transceiver and a LIN protocol controller along with easy to configure switch inputs and PWM outputs makes it possible to develop simple, but powerful and cheap switch slave nodes for LIN Bus systems in a short timeframe.
Doors modules, steering wheel, etc.
- LIN-based switch modules for steering wheel, dashboard, seat, roof, doors, …
- Application requiring easy connection to LIN network
- Simple actuators like seat heating
- Other LIN IO extensions
Proven dual task MCU architecture
- LIN protocol controller
- 16-bit Application controller
- LIN physical layer transceiver
- Approved LIN driver
Features and benefits
-
Application controller
-
Internal 12 MHz RC-oscillator
-
16-bit MULAN MCU with 16kB OTP, 512 byte RAM, 192 byte EEPROM with ECC
-
LIN protocol controller according to LIN 2.x and SAE J2602
-
Baud rate up to 19.2 kBaud
-
Frame processing
-
Low interrupt load to the application
-
LIN transceiver according to LIN 2.x and SAE J2602
-
Slew rate control for best EME behaviour
-
High EMI immunity
-
IO configuration
-
18 fully configurable high current/high voltage inputs/outputs (7mA/26.5V)
-
Ground shift tolerant I/Os
-
All IOs configurable pull-up or pull-down characteristics
-
Eight PWM outputs (8-bit, 80Hz to 30kHz)
-
Ten 10-bit ADC channels
-
Eight interrupt capable inputs
-
Configurable wake up sources (LIN, IOs, ADC)
-
Constant current output (2mA) for external low voltage loads via bipolar transistor
-
IOs fully diagnosable
-
Integrated window watchdog and additional independent analogue watchdog
-
Voltage regulator
-
Low standby current consumption of type 25µA in sleep mode
-
Over-temperature shutdown, 45V load dump protected
-
Other features
-
Automotive temperature range of –40°C to 125°C
- Small MLF 5x5 28-pin package
Documents and tools
Application note(s)
- Download application note for EVB80104-A2 - Short description
- Download application note for EVB80104-A3 - Short description
- Download application note for PTC04-DB-MLX80104 - Short description
- Download application note for CablePTC04 A3 - Short description
- Download application note for EVB80104 B - Short description