PTC-04 - Programmer for Melexis PTC devices

The PTC-04 (Programming Through Connector) is an End-of-Line (production) tool which allow the programmation and calibration of compatible ICs. It also support product development with debugging features.

Documentation

General PTC-04 documentations Type Revision Date
PTC-04 and daughterboards for position and pressure sensor products DB selection guide .pdf - -
Frequently Asked Questions (FAQ) on PTC-04 .pdf 1.43 February 2019
Get started with PTC-04 .pdf 7 December 2020
Replacing daughter board of PTC-04 .pdf - -
PTC-04 Datasheets Type Revision Date
PTC-04 .pdf 8 January 2021
PTC-04 Hardware History .pdf 1.5 December 2020
PTC-04 DB 922xx .pdf 1.3 March 2022
PTC-04 DB 90316 .pdf 5 February 2021
PTC-04 DB HALL01 .pdf 3 August 2020
PTC-04 DB HALL02 .pdf 2.2 August 2020
PTC-04 DB HALL03 .pdf 5 August 2020
PTC-04 DB HALL05 .pdf 2 August 2020
PTC-04 DB HALL06 .pdf 9 May 2022
PTC-04 DB PRESSURE01 .pdf 4 January 2022
PTC-04 DB SPI .pdf 3 August 2020
PTC-04 DB FastLoader .pdf 1.2 2009
PTC-04 calibration Type Revision Date
PTC-04 calibration - request calibration with a certification via your sales representative - - -
PTC-04 calibration - user manual for self-handling .pdf 1.44 May 2018

PTC-04 - Programmer for Melexis PTC devices

The PTC-04 programmer is an End-of-Line tool designed for efficient and precise calibration of compatible ICs. It also support product development with debugging features. The PTC-04 can be easily adapted to a standard PC and to an application module to allow calibration of programmable sensor ICs within the operating environment.

The PTC-04 contains its own programmable power supply and measurement circuitry. It is similar to a standard EEPROM programmer, but adds many special features such as 16-bit voltage and current measurement capability, and configuration options that will accommodate users from the prototyping phase directly into production.

A PC is required (not included) to load software to the programmer and control the functions of the programmer. Communication is done through a standard RS-232 null modem cable to a COM port of the PC (speed of or 115.2kbs) or via USB (USB 1.1 or USB 2.0 Type A).

 

Features and benefits

  • Universal programming utility

  • Fast development

  • Fast plug-in for software applications

  • Atmega128 Core

  • Firmware updatable via RS232 and USB

  • FPGA updatable via RS232 and USB

  • 3 High current programmable supplies

  • 1 High speed fast programmable supply

  • 16-bit level settings

  • 16-bit differential measurements

  • 4 analog comparators

  • Vector generator

  • I²C to daughter board

  • Mountable in 19” rack


Video: Detailed introduction to the PTC-04 universal programmer tool for magnetic sensors (5m16s)

 

PTC-04 - Programmer for Melexis PTC devices