Latch/ Switch

These products meet your demands to reduce power budget and space
utilization, while also taking care of functional safety and system
flexibility aspects.

Products

2-Wire Hall-Effect Latch Sensor Switch

MLX92221

Second generation 2-wire Hall-effect switch designed in mixed signal CMOS technology with very wide range for magnetic sensitivity.

 

Learn more

2-Wire Hall Effect Sensor Switch (Second Generation)

MLX92241

2-wire Hall effect sensor switch (second generation).

 

Learn more

End-Of-Line Programmable 2-Wire Hall Latch/Switch

MLX92242

This programmable advanced Hall effect switch/latch IC enables end-of-line (EOL) calibration to reduce mechanical tolerances assuring reliable and accurate switching thresholds using only two wires.

 

Learn more

Bipolar Hall Switch - High Sensitivity

US2881

Hall effect sensor bipolar switch for commutation applications in brushless (BL)DC motors and automotive speed sensing.

 

Learn more

Hall Latch – High Sensitivity

US1881

Melexis’ Hall effect sensor latch with advanced chopper stabilization techniques to provide accurate magnetic switch points.

 

Learn more

Bipolar Hall Switch - Very High Sensitivity

US2884

Hall Effect sensor bipolar switch for commutation applications in brushless (BL)DC motors and automotive speed sensing.

Learn more

Hall Latch Sensor - Low Voltage and High Sensitivity

US3881

Hall Effect sensor latch with advanced chopper stabilization techniques to provide accurate and stable magnetic switch points.

Learn more

Bipolar Hall Switch - Low Voltage and Very High Sensitivity

US4881

Bipolar hall effect sensor bipolar switch with advanced chopper stabilization techniques to provide accurate and stable magnetic switch points.

Learn more

Bipolar Hall Switch Sensor - Very High Sensitivity

US2882

Hall effect sensor bipolar switch with CMOS technology suitable for use in both automotive and consumer applications. Very high magnetic sensitivity.

Learn more

MicroPower and Omnipolar Hall Effect Switch - Very High Sensitivity

MLX90248

MicroPower and omnipolar Hall effect switch - Very high sensitivity.

 

Learn more

Unipolar Hall-Effect Switch - Medium Sensitivity

US5781

Medium sensitive unipolar Hall-Effect switch with advanced chopper stabilization techniques to provide accurate and stable magnetic switch points.

Learn more

Unipolar Hall-Effect Switch - Medium Sensitivity

US5782

Unipolar Hall-Effect switch designed in mixed signal CMOS technology. Wide operating voltage and temperature range. Suitable for automotive and solid state switch applications.

 

Learn more

Unipolar Hall-Effect Switch - Low Sensitivity

US5881

Hall-Effect unipolar design switches designed in CMOS technology. Wide operating voltage range and extended choice of temperature range.

 

Learn more

Unipolar Hall-Effect Switch - High Sensitivity

US568x

Unipolar Hall-Effect switch with CMOS technology. Advanced chopper stabilization techniques provide accurate and stable magnetic switch points.

 

Learn more

Hall Latch - Very High Sensitivity

MLX92211

Second generation Hall-effect latch designed in mixed signal CMOS technology. Very high magnetic sensitivity with wide operating voltage range from 2.7 to 24 V.

 

Learn more

Low Voltage Hall Latch and Switch Sensor

MLX92212

Cost optimized automotive qualified IC available in a unipolar and bipolar version. Designed for microcontroller standalone PCB applications.

 

Learn more

Hall Switch - New Generation

MLX92231

This second gen switch integrates in one package programmable thresholds, voltage regulator, Hall sensor with advanced offset cancellation system and an open-drain output driver.

Learn more

MicroPower and Low Voltage Hall-Effect Latch with Enable Pin

MLX92213

Ultra-sensitive Hall Latch sensor. Ideal solution for use in speed and direction detection application based on multipole magnet assembly for low-power devices.

 

Learn more

End-Of-Line Programmable 3-Wire Hall Latch/Switch

MLX92232

End-of-line programmable 3-wire Hall Latch/switch.

Learn more

Hall Latch - 2nd Generation - Very High Sensitivity

MLX92215

Second generation 2-wire Hall-Effect switch designed in mixed signal CMOS technology for consumer applications.

 

Learn more

ASIL B, uPower and IMC compatible Latch/Switch

MLX92292

IMC-Hall devices combining uPower functionality with ASIL B capability. Highly suitable for battery-powered operation.

 

Learn more

Dual Hall-Effect Latch

MLX90224

The Melexis MLX90224 series are dual Hall-Effect latches. It includes two Hall-Effect latch functions of which typical thresholds are ± 2.0mT.

 

Learn more

Dual Hall Effect Latch with Speed and Direction - Medium Sensitivity

MLX92251

Dual Hall effect Latch with speed and direction open-drain outputs, and medium sensitivity.

 

Learn more

MicroPower and Omnipolar Hall Effect Switch - Very High Sensitivity

MLX90248

MicroPower and omnipolar Hall effect switch - Very high sensitivity.

 

Learn more

MicroPower and Low Voltage Hall-Effect Latch with Enable Pin

MLX92213

Ultra-sensitive Hall Latch sensor. Ideal solution for use in speed and direction detection application based on multipole magnet assembly for low-power devices.

 

Learn more

ASIL B, uPower and IMC compatible Latch/Switch

MLX92292

IMC-Hall devices combining uPower functionality with ASIL B capability. Highly suitable for battery-powered operation.

 

Learn more

End-Of-Line Programmable 3-Wire Hall Latch/Switch

MLX92232

End-of-line programmable 3-wire Hall Latch/switch.

Learn more

Hall Latch - New Generation - Pre-Programmed Thresholds

MLX92211-BAA

New generation Hall Latch - Pre-programmed thresholds.

 

Learn more

End-Of-Line Programmable 2-Wire Hall Latch/Switch

MLX92242

This programmable advanced Hall effect switch/latch IC enables end-of-line (EOL) calibration to reduce mechanical tolerances assuring reliable and accurate switching thresholds using only two wires.

 

Learn more

ASIL B, uPower and IMC compatible Latch/Switch

MLX92292

IMC-Hall devices combining uPower functionality with ASIL B capability. Highly suitable for battery-powered operation.

 

Learn more

Programmable Linear Hall-Effect sensor

MLX90215

The MLX90215 is a Programmable Linear Hall-Effect sensor with ratiometric analog output.

Learn more

Programmable Linear Hall-Effect Sensor

MLX90251

The MLX90251 is a Programmable Linear Hall-Effect sensor with ratiometric analog output.

Learn more

Programmable Linear Hall-Effect Sensor

MLX90288

An SMD Programmable Linear Hall Sensor with a ratiometric analog output targeted for small stroke rotary and linear position sensor applications. It can also be used for slow current sensing application.

 

Learn more

Programmable Linear Hall-Effect Sensor

MLX90291

An SMD Programmable Linear Hall Sensor with a PWM (Pulse-Width Modulation) open-drain output targeted for small stroke rotary and linear position sensor applications. It can also be used for slow current sensing application.

Learn more

Programmable Linear Hall-Effect Sensor

MLX90292

An SMD Redundant Programmable Linear Hall Sensor with digital reporting protocol for position sensor applications with high safety requirements (ISO 26262 - ASIL) and/or small data latency.

 

Learn more

Triaxis® Rotary Position Sensor

MLX90316

The MLX90316 is a Triaxis® Rotary Position Sensor providing the angular position of a small dipole magnet rotating above the device surface (end-of-shaft magnet).

Learn more

Triaxis® Position Sensor

MLX90333

The MLX90333 is a Triaxis® Position Sensor able to sense any magnet moving in its surrounding through the measurement and the processing of the 3 spatial components of the magnetic flux density vector (i.e. Bx, By and Bz).

 

Learn more

Triaxis® Rotary Position Sensor

MLX90324

The MLX90324 is a Triaxis® Rotary Position Sensor providing the angular position of a small dipole magnet rotating above the device surface (end-of-shaft magnet).

 

Learn more

Triaxis® Position Sensor

MLX90363

The MLX90363 is the Generation II½ of Triaxis® Position Sensor. Thanks to an Integrated Magneto-Concentrator (IMC) on its surface, the monolithic device senses, in a contactless fashion, the 3 spatial components (i.e. Bx, By and Bz) of the applied magnetic flux density.

Learn more

Triaxis® Position Sensor

MLX90360

The MLX90360 is the 2nd Generation of Triaxis® Position Sensor. Thanks to an Integrated Magneto-Concentrator (IMC) on its surface, the monolithic device senses, in a contactless fashion, the 3 spatial components (i.e. Bx, By and Bz) of the applied magnetic flux density.

Learn more

Triaxis® Position Sensor Assembly

MLX90364

The MLX90364 Triaxis® product is based on a Dual Mold Package (DMP) which integrates the Triaxis® Position Sensor MLX90365 together with the discrete decoupling components necessary to meet the strenuous automotive ESD and EMC requirements as well as the mechanical robustness for the most challenging environments.

Learn more

Triaxis® Position Sensor

MLX90365

The MLX90365 is the Generation II½ of Triaxis® Position Sensor. Thanks to an Integrated Magneto-Concentrator (IMC) on its surface, the monolithic device senses, in a contactless fashion, the 3 spatial components (i.e. Bx, By and Bz) of the applied magnetic flux density.

Learn more

Triaxis® Position Sensor

MLX90367

The MLX90367 is the Generation II½ of Triaxis® Position Sensor featuring SAE J2716/SENT protocol. Thanks to an Integrated Magneto-Concentrator (IMC) on its surface, the monolithic device senses, in a contactless fashion, the 3 spatial components (i.e. Bx, By and Bz) of the applied magnetic flux density.

 

Learn more

Triaxis® Position Sensor Assembly

MLX90366

Based on a Dual Mold Package (DMP) which integrates the Triaxis® Position Sensor MLX90367 together with the discrete decoupling components necessary to meet the strenuous automotive ESD and EMC requirements as well as the mechanical robustness for the most challenging environments.

Learn more

ASIL B, uPower and IMC compatible Latch/Switch

MLX92292

IMC-Hall devices combining uPower functionality with ASIL B capability. Highly suitable for battery-powered operation.

 

Learn more

End-Of-Line Programmable 2-Wire Hall Latch/Switch

MLX92242

This programmable advanced Hall effect switch/latch IC enables end-of-line (EOL) calibration to reduce mechanical tolerances assuring reliable and accurate switching thresholds using only two wires.

 

Learn more

ASIL B, uPower and IMC compatible Latch/Switch

MLX92292

IMC-Hall devices combining uPower functionality with ASIL B capability. Highly suitable for battery-powered operation.

 

Learn more

Safety Interlock Switch Sensor Interface IC

MLX16305

Safety interlock switch sensor interface allows diagnosing multiple remote 2-wire switches in safety applications at half the wiring and connector cost.

 

Learn more

Inspired Engineering

We use cookies in order to let you fully experience this website. Cookies are small files we put in your browser to mainly track usage or remember your settings of our site but they don’t tell us who you are. Want to know more about how we use these Cookies please read our Cookie policy.

OK